IFR, VFR & RVSM Certifications

Baker Avionics provides professional avionics certification services for general aviation aircraft, helicopters, and regional operators. From basic VFR transponder checks to full IFR and RVSM certification testing, our FAA-certified technicians use state-of-the-art equipment to complete accurate, compliant inspections with minimal aircraft downtime.

Essential Certifications, Done Efficiently

Federal regulations require periodic certification of your aircraft’s critical avionics systems. At Baker Avionics, we handle all required testing so you can return to service quickly and confidently. Whether it’s a transponder inspection or a full altimeter and static system test, we make the process straightforward and compliant.

VFR Certification: Transponder

VFR (Visual Flight Rules) certification focuses on verifying that your transponder and related systems are operating correctly.

For VFR operations, all transponder-equipped aircraft must be inspected to confirm proper operation. Poorly aligned or malfunctioning transponder systems can cause incorrect altitude reporting or no radar target at all, risking air traffic control interference. Our team performs these checks efficiently, often right on the ramp, using certified test equipment.

IFR Certification: Altimeter & Static System Testing

IFR (Instrument Flight Rules) certification expands on VFR testing with additional inspections of your altimeter, encoder, and static system in accordance with FAA regulations.

These tests ensure your aircraft’s environmental sensing and altitude reporting systems meet accuracy requirements for instrument flight, which is crucial for safety and compliance in controlled airspace. Testing usually takes under an hour, depending on aircraft configuration.

RVSM Certification: Reduced Vertical Separation

RVSM (Reduced Vertical Separation Minimum) certification allows aircraft to operate with 1,000-ft vertical separation at higher flight levels—improving fuel efficiency and access to optimized airspace.

To meet RVSM standards, your aircraft’s altitude reporting and automatic systems must demonstrate consistent accuracy per FAA requirements. Our experienced technicians are familiar with RVSM requirements and testing procedures so we can evaluate, diagnose, and correct discrepancies to help you achieve compliance confidently.

Need a Certification Inspection?

From VFR transponder checks to IFR and RVSM testing, we ensure certified avionics performance and regulatory compliance.

Schedule your cert

Our Process

Our certification workflow is designed to be clear, compliant, and efficient, with minimal disruption to your operations.

Step1

Documentation Review

We begin by reviewing your aircraft’s records and determining required certification intervals and tests.

Step2

Pre-Test Inspection

Our technicians perform a quick pre-inspection to verify system readiness and identify any issues that could affect certification.

Step3

Testing & Measurement

Certified test equipment is used to evaluate your aircraft’s transponder, altimeter, static system, and other required instruments.

Step4

Certification & Reporting

Once testing is completed, we document compliance and update your aircraft records. If any discrepancies are found, we provide clear guidance on corrective actions.

Certifications FAQs

  • Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur

  • Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur

  • Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur

  • Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur

Testimonials

Ricardo

Took my 76 Piper Cherokee to Baker for a partial panel upgrade (Autopilot, Engine monitor, new cut panel) the results are amazing. Baker made sure that the end result was working the way I wanted it to, the finish on the new panel is perfect. Baker really takes care of their customers.

Mike

I had Baker avionics install a fair amount of equipment in my 172. The experience was very good. I had very few bugs to work out and the crew got on it very quickly and i have had no issues since. Everything was done as we agreed with no surprises. I enjoyed the people at Bakers and now consider them friends. Thank you for the nice work .

Newcomb

I really appreciate how much these guys went above and beyond for me. They gave me rides to and from Medford when I couldn’t get a rental car to save me a ton on Uber. They gave me carte blac access to their office and hangar to conduct company business. But most importantly, they did a great job on the avionics on my company’s helicopter. Extremely open and generous folks at a family run business.
Thank you Greg and Leah!

Trent

Baker Avionics has been a blessing to my family and our airplane “Rudy”. I have came from 30 miles south of the Canadian border twice for this shop because of the excellent experience I have had. Greg and his great team have been very upfront and done a great job walking me through my project from over 600 miles away; from constant weekly updates; getting designs approved and going above and beyond with what I asked. This last time down to Grants Pass I had my complete panel redone. I had a general design but Baker Avionics design team went above and beyond to turn the panel into what it was. Thank you agin guys and will look to work with you guys again on my next airplane. Just to show off here was the before and after.

Matt

Amazing team. Got our plane done on schedule with only a couple delays that were out of their control. So happy with the final product and would recommend to anyone and everyone. Thank you, Greg, and team!!

Tim

Along with performing a static inspection, Baker Avionics went above and beyond to help me out with some radio issues I was having with my Grumman AA1B. The owner and all the staff there were super nice, and they have well maintained hangar and waiting area if you need to hang around. I wouldn’t hesitate to fly multiple hours to get there, it’s worth it to have them work on my aircraft.

Theo

They did a great job installing best-in-class avionics, not just the biggest brand, and did it at a very good price. My panel is featured in their photos if you want to see it.

Rocky

Greg came out to KOTH and was gracious to fit me into his schedule at the last minute. He updated my Aspen 1000 Max and GTN750. He was highly professional, knowledgeable, efficient, and great to talk with. Would highly recommend him and his team.

Quote Request

Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat.Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat.

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
Name*

Aircraft Information

Are You The Aircraft Owner?

How Can We Help?